Juice, Nectar Production Line
The machine is mainly used in the juice filling operations.
The whole process is automatic.PLC control,touch screen operation.
The juice production line is widely used in filling juices, m in bottles made of polyester and plastics.
The juice production line can also be used in hot filling if installed with temperature controlling device.
Rotative rinsing equipped with fixed nozzles, with grippers. -The grippers take the bottles from the inlet starwheel while they are still driven by the starwheel, thus guaranteeing a safe and tight grip. -After the gripping, the bottle is turned upside down and centred above a spraying nozzle which directs a stream of rinse water into the bottle for washing. After the draining period the bottle is turned over to an upright position again.
The starwheels drive the bottles always "by the neck" through the rinsing, filling and capping steps. For the various types of bottle, it is easy to adjust the structure by our specialized design. -Product bowl is to reduce the loss of heat. -If the temperature is lower than the setting value, the filling valves will stop and return the last beverage in filling valve to recycle tank and return to UHT again to sterilize with pump. Which will save liquid.
Rotative capping heads, suitable for screwing plastic caps onto PET bottles   -The fixed part consists of the cap hopper, the cap elevator which is customized and the cam actuating the capping heads.

  • Rinsing
  • Filling
  • Capping
Product Catalog